Double Tear Drop Casting Mold
New "EZ4U" Molds!
Use fine or powder frit in the center cavity for best results and do not over-fill.
Two wire loops are enclosed with every mold, and you can use any kiln-safe wire like our High-Temp Stamen Wire for more castings.
DIMENSIONS:Outer Dimensions: 1 7/8"w x 2 3/4"
Inner Dimensions: 1 1/4" w x 2 1/8" Fill Weight: approximately 14 grams or 1/2 ounce in the larger cavity after using powder or fine frit to fill the center cavity.
Don't fuss with a brush! You end up with marks and puddling and it'll take AGES to dry. Use our Kiln Wash Sprayer and Spray Shelter to spray your kiln wash on your molds. Easy, fast and dries so quickly!