Menu
Cart 0

Kiln Wash Sprayer Demo

Posted on

Here's a video demo of our new Kiln Wash Sprayer!
Hope you're as excited as we are about it!

SPRAY your kiln wash on your slumping or casting molds or kiln shelves instead of using a haik brush! You will never have drips, runs or brush stroke marks. You will never lose detail in your casting molds. A perfectly even coating. Goes on fast and dries quickly. Much more economical than a compressor-based sprayer. This sprayer is a gem!

 


Share this post



← Older Post


0 comments

Leave a comment

Please note, comments must be approved before they are published.